In summer a cattle trough needs more attention, not less. Agriculture Victoria says water supplied to a stock containment area should be fresh, cool and clean, that surface material should be skimmed off the water daily, and that troughs should be completely emptied, cleaned and re-filled every 1 to 2 days. In hot weather treat that as the floor rather than the target. On a Victorian dairy farm where we have a trial trough, troughs are cleaned every day, and twice a day in hot weather, because algae grows within 24 hours. The rest comes down to where the trough sits, how much water moves through it, and how quickly you can empty it.
Why summer is harder
Three things change at once.
Demand climbs. Agriculture Victoria lists peak demand for dry cattle at 100 litres a head a day against an average of 80, lactating cattle at 120 against 100, and weaner calves at 70 against 55. A reticulated system needs to deliver the daily peak demand in 4 hours so all stock get a chance to drink regularly. As an example, Agriculture Victoria puts the minimum flow rate for 160 dry cattle at 67 litres per minute. If the supply cannot keep up, the trough sits low and warm for part of the day.
Water warms up. Evidence from recent droughts shows stock avoid or reduce consumption of water that is warm, stagnant, polluted with food residues, or has dust or straw floating on the surface. Containment areas add to that, because stock there are exposed to increased levels of dust and mud.
Access gets tighter. The MLA feedlot design manual calls for a minimum of 25 mm a head of linear trough space in normal weather and 75 mm a head in hot conditions.
Grain on muzzles
The manual is direct about trough placement. Cattle drink soon after feeding, and after feeding they hold grain on their muzzles and in their mouth for a time. If troughs sit too close to the feed bunks, cattle transfer more grain across to the water trough, which means more frequent cleaning. Agriculture Victoria makes the same point more plainly: troughs should be located away from feeding areas to minimise water contamination. If you are feeding grain in a containment area this summer and the trough is a few steps from the bunk, that is the first thing to change.
What the manual says about fresh, cool water
The manual's design objectives for a feedlot trough system are to provide fresh, cool, clean, palatable water in adequate volume, to give enough access area for all cattle to drink regularly, and to allow easy and regular cleaning inside the trough. A few points from it are worth borrowing on a smaller place:
- Low volume troughs waste less water with each flush, and long, narrow, shallow troughs are preferable to large, deep, high volume circular ones.
- Concrete is the most common material because it is durable and can stabilise water temperature. Agriculture Victoria prefers it for the same reason.
- Each trough should have a large drainage or flushing outlet, placed so the water runs away from the trough. Troughs are flushed by unscrewing the stand pipe, which opens the discharge bung.
- Shade over the trough, or a trough placed in the shaded part of the pen, reduces heat loading on the water and the trough. The trade off is that the ground around it stays wet longer, so aprons may need to be larger, and cattle congregating in the shade can restrict access.
The options
Hand cleaning is the baseline: skim daily, then tip out, scrub and refill every 1 to 2 days, twice a day in the heat if that is what it takes. Agriculture Victoria notes a long shallow trough with a smooth internal profile, a gate valve and a large outlet bung makes that job quick. It still takes time. On our calculator page, ten minutes a trough once a day works out at about 61 hours a year, or $2,123 with labour at $35 an hour, and in summer it can be twice a day.
The other option is to let water do the scrubbing. The SATURN trough flushes itself at an interval you set from your phone, so sediment and feed residue leave the trough instead of settling. It holds 50 litres and uses about 60 litres a flush, with one to two flushes a day suggested depending on stock numbers (manufacturer figures). The float valve is mechanical, so stock keep water even if the controller battery goes flat.
What we recommend
Start with the free changes: move the trough away from the feed, skim the surface daily, and check the float keeps the trough close to full through the hottest part of the day. If you are still tipping and scrubbing once or twice a day in January, a self-flushing trough is worth testing on your own farm beside your existing water, and keeping your own record of how often you still clean it by hand. We run 3 month trials in Victoria, and how the trial is judged is agreed in writing first.
- Agriculture Victoria, Water supply in stock containment areas (agriculture.vic.gov.au)
- Meat & Livestock Australia, Feedlot design manual, chapter 20 Water trough design and sewer systems (2016)
- Manufacturer information, SATURN trough specifications (cleantrough.com.au/product)