SATURN self-flushing livestock water trough

A rotomoulded trough that flushes itself on a schedule, so sediment and feed residue leave the trough instead of sitting in your stock's drinking water. Available in green or black.

Two SATURN troughs, green and black, side by side
Award certificate: NAB Agribusiness Award of Excellence 2026, presented to Wispac Australia for the Saturn Smart Livestock Water System

Saturn receives the NAB Agribusiness Award of Excellence 2026

Australian National Field Days, Borenore NSW, 22 to 24 October 2026 (awarded to manufacturer Wispac Australia for the Saturn Smart Livestock Water System).

The award recognises new, innovative design and manufacture of machinery and equipment for Australian agriculture. In the words of the certificate, the product “meets high criteria standards and is worthy of the attention of primary producers.”

What happens during a flush

Filmed on farm, with narration.

  1. At the interval you set on your phone, the flush valve opens.
  2. Water flows along the trough floor and carries sediment and feed residue out through the drain.
  3. The mechanical float valve refills the trough with clean water.
  4. If the controller battery runs flat, the trough keeps refilling through the float valve; only the automatic flush stops.

Full test: as dirty as we could make it

One take. Sped-up parts are marked on screen.

  1. We shovel soil into the trough to make it as dirty as we can.
  2. The flush pushes the mud along the floor and out through the drain at the far end. In about a minute, the mud is gone.
  3. The mechanical float valve refills the trough with clean water. Each flush uses about 60 litres (manufacturer figure).

Specifications

Manufacturer information.

Body

Construction
UV-stabilised, rotomoulded LLDPE
Outer dimensions
2,225 mm (L) x 430 mm (W) x 350 mm (D)
Drinking length
1,950 mm
Trough volume
50 litres (low volume, high turnover)
Origin
Designed in Victoria. Assembled in Australia from imported components.
Installation
About 30 minutes
Portability
Can be relocated between paddocks as stock rotate

Water

Operating pressure
200 to 1,000 kPa (2 to 10 bar)
Refill
Mechanical float valve, no power needed
Water per flush
Approximately 60 litres
Refill rate and stock per trough
To be confirmed by the manufacturer

Control and power

Flush control
Bluetooth, set flush intervals from your smartphone
Power
Battery-powered flush controller, kept charged by its own solar panel. If it ever runs very low, charge it by USB-C: one full charge runs 12 months or more. No mains power needed. The app shows the battery level.
Warranty
2 years on spare parts
Download the brochure (PDF)
QR code to download the SATURN brochureOr scan to download

Questions farmers ask

How often does the SATURN trough flush?
You set the interval from your phone over Bluetooth, standing next to the trough. The manufacturer suggests one to two flushes a day depending on stock numbers (manufacturer figure).
How much water does a flush use?
Approximately 60 litres per flush (manufacturer figure). On the calculator page you can see what that adds up to over a year at your flush setting.
How is the flush controller powered and set?
The flush controller is solar-charged and you control it from your phone over Bluetooth. The float valve is mechanical, so stock never go without water.
How is it connected to water?
The inlet takes a 1-inch plastic pipe. The outlet is designed for a 2-inch pipe; for the trial it can be left unconnected, so all you need ready is a 1-inch plastic pipe to the inlet.
Does it need mains power?
No. The flush controller runs on a battery kept charged by its own solar panel (it can also be charged by USB-C), and the float valve needs no power at all.
What's the warranty?
Two years on spare parts. The only parts that wear are the mechanical float valve and the valve that does the self-flushing. The design is kept that simple on purpose, so it's reliable and lasts.
Where does the dirty water go?
Out through the drain at the far end of the trough. Where that water runs is worked out with you at installation, the same way you would place any trough with a drain.
How long does installation take?
About 30 minutes beside your existing water supply.
Can it be moved between paddocks?
Yes. The trough can be relocated between paddocks as stock rotate.
Where are trials available?
Victoria. Enquiries from other states are welcome: we ship Australia-wide, and trials outside Victoria are by arrangement. We install a trough beside your existing water and you use it for 3 months. Not happy? Send it back within the 3 months, with no obligation to buy. Keep it, and we invoice you at the end. The 3-month terms apply to the first trough for each farm business.
What does it cost after the trial?
Pricing is confirmed with you before the trial starts, in writing, so there are no surprises at the end of the 3 months.

Is it worth it for your operation?

Put your own numbers into the calculator. It takes a minute.

Open the savings calculator